Trailed seeders

For precision farming

Our T series range meets the expectations of the most demanding farmer. They can incorporate all the sowing attachment models available in the mounted models.

High performance machines due to their extensive working widths and load capacity of 7,000 litres.

Floatation wheels to prevent soil compaction.

Support stand and hydraulic parking brake.

The sowing attachment includes a double flotation device and is attached to the main frame by a hydraulic lifting device. It adapts to the ground, both lengthwise and crosswise, in order to achieve a uniform depth of sowing throughout the field.

The seed depth is adjusted quickly and easily by means of central control and in each lateral extension.

All the hydraulic mechanisms are managed from the tractor cab via an electric console.

Here you can learn more about our range for conventional tillage, minimum tillage and direct seeding.

PNEUMATIC DISTRIBUTION

The volumetric distributor is exclusively designed by AGUIRRE. Flow proportional to the forward movement in order to always maintain the desired dose.

The dosing/regulation systems allow us to sow, with absolute precision, from 1 to 300 kg/ha of any type of seed (rape, alfalfa, cereals, beans, etc.)

Adjustment of the dose is carried out via a specific window for this purpose and with the help of the flow rate table in the manual supplied with each machine.

Another emptying window allows us to change seed quickly without leaving any residue inside the hopper.

Seeding is automatically interrupted by lifting the sowing attachment during manoeuvres or when desired by the user.

Impulsión de aire de Sembradoras Arrastradas Aguirre

AIR DRIVE

A turbine drives the air current needed to carry the flow of seeds from the outlet of the distributor to the sowing lines distributed on the seeder body.

A dispensing head, with as many outputs as there are lines located outside and on the seeding attachment, takes care of evenly distributing the air flow and the seeds to the entire width of the machine.

Due to its power it is possible to work with power take off regimes which are not too high in order to save fuel and so that tractor driving is quiet.

A multiplication system transforms this PTO regime to the turbine revolutions needed for the different working widths.

ELECTRONICS

Three levels of equipment to control the various functions of the seeder.

Basic console: forward speed, hectare-count, hopper level, distributor operating control, turbine control and general sowing cut-off.

Heeling console: forward speed, hectare-count, hopper level, distributor operating control, turbine control and symmetrical and asymmetrical tramlining.

Electro drive: forward speed, hectare-count, hopper level, distributor operating control, turbine control, heeling and modulation of seeding rate.

RANGE

TRAILED MULTIFUNCTIONAL GRID “TD-T” SEEDER: (approximate measurements)

TABLA SEMBRADORA “TD-T” REJA POLIVALENTE ARRASTRADA: (medidas aproximadas)

TRAILED GRID “RS-T” SEEDER: (approximate measurements)

TABLA SEMBRADORA “TD-T” REJA POLIVALENTE ARRASTRADA: (medidas aproximadas)

The grid arm allows us to sow under extreme conditions of unprepared, wet, stony or clay soils.

Non stop device using springs to prevent breakage and which allows perfect adaptation to uneven surfaces.

Excellent depth control for sowing the most challenging seeds (rape, alfalfa, etc.) with a device that eliminates air pressure and with an anti-mud system.

For sowing in minimum and conventional tillage.

Brazo de reja Sembradoras Arrastradas Aguirre

Documentation and Catalogues

TD Trailed Seeder 

RS Trailed Seeder